Fret Slotting Saw and Depth Guide

fret slot depth
➡️【Mk..com】✅अभी जुड़ें और अनुभव करें ✅रोमांचक स्लॉट मशीन कैसीनो गेम☝ बड़ी जीतें और हमारे ऑनलाइन कैसीनो में बड़ी जीत☝ अभी आएं! ✅ 

StewMac sells a fret slot depth gauge, but you can also make one yourself with a razor blade or sheet metal stock (Mark Fogleman's suggested

Slots are normally cut to 023 for most fret wire used today Tang measurement varies a bit dependent upon size but it's usually around 116

fret slot depth A correct fingerboard thickness should be roughly 14″, meaning your cut depth should roughly be 18″ Cutting at a 18″ depth will ensure that

fret slot saw My preference is to initially slot shallow and then using a depth stop on my pull saw, set to the fret tang depth, clean up each slot so that